Tl-audio VP-1 Bedienungsanleitung

CONTENTS 1 INTRODUCTION 2 PRECAUTIONS 3 INSTALLATION 3.1 AC Mains Supply 3.2 Audio Inputs 3.3 Unbalanced Line Inputs 3.4 Instrument Inputs 3.5 Ins

The VP-1 may be free standing, or mounted in a standard 19” rack where it will occupy 3U of space. 4 OPERATION 4.1 Input Select. The VP-1 is desi

4.5 Pad. When activated, the pad switch will reduce the Mic input gain by 30dB. This is useful when dealing with high level mic input signals, such

When the signal level returns to a level above the threshold, the gain is rapidly restored to ensure that no transient edges are lost. The Expander/

4.14 De-esser Frequency. The Frequency control selects at which particular frequency the gain reduction is made to occur, and covers the range 700

the opposite direction, but our feeling is that as you turn the control ‘up’ it should have more effect! 4.19 Compressor Attack and Release. Th

This switch allows a choice of two compressor response types - Hard or Soft Knee. Soft knee mode means that once the signal has exceeded the threshold

HF shelving at 2.2kHz, 5kHz, 8kHz and 12kHz The EQ slopes have a second order 12dB/octave response, and the frequency values are -3dB points. An asso

but the EQ Pre switch will route the signal through the EQ first. This can result in a different tonal character, and also allows certain frequencies

4.35 Output Level. This control acts much like the fader on a recording console, in that it regulates the overall level produced at the VP-1’s line

meter monitoring digital output level. These related front panel controls and meters will have no effect until the DO-1 card is fitted. The DO-1 enab

1 INTRODUCTION Congratulations on purchasing the VP-1 Mono Valve Processor from TL Audio. The VP-1 combines classic Pentode and Triode valve techni

A rear panel Wordclock Input is provided for connecting the VP-1 to an external master clock source. An associated switch on the rear panel selects be

that frequency. This would be an alternative way of de-essing an input signal, by setting the boosted EQ frequency to match that of the sibilance. Q:

driving, by limiting the maximum output level that the VP-1 generates. A 0VU output reading on the VP-1 should read approximately -18dB on a digital

An expander/gate circuit is also included in the VP-1. The circuit provides variable threshold and attack and release times, and includes a four segme

2 PRECAUTIONS The TL Audio VP-1 processor requires very little installation, but like all electrical equipment, care must be taken to ensure relia

3.2 Audio Inputs. The VP-1 has two female, 3 pin XLR connectors, for mic and line sources. Both are compatible with either balanced or unbalanced

3.5 Insertion Points. The insertion points are interfaced via a 3 pin, 0.25” switched jack socket on the rear of the unit. The pin connections ar